Slalom Ski set up information


 Slalom Ski Factory Recommended Fin Settings

Recommended settings for Fusion, Fusion GS, Z7 ST & ST Diamond Slalom

Needle Flat Wing at
Wing at
Size Length Depth From Tail From Tail 34 mph
36 mph
Binding
62" 6.885" 2.485" 0.760 0.72 7 degrees
8 degrees
27.5"
63"6.900"2.490"0.7650.7257 degrees8 degrees28"
64" 6.905" 2.495" 0.770 0.73" 7 degrees8 degrees28.5"
65" 6.910" 2.505" 0.775 0.735" 7 degrees8 degrees29"
66" 6.915" 2.510" 0.780 0.74" 7 degrees8 degrees29.5"
67" 6.920" 2.515" 0.785 0.745" 7 degrees8 degrees30"
68" 6.925" 2.520" 0.790 0.75" 7 degrees8 degrees30.5"








Recommended settings for X7, X7 Pearl and X3 Slalom

 		NeedleFlatWing at
Wing at
SizeLengthDepthFrom TailFrom Tail34 mph
36 mph
Binding
64"6.910"
2.500"0.770"0.730"7 degrees8 degrees28.5"
65"6.920"
2.505"0.775"0.735"7 degrees8 degrees29"
66"6.930"
2.510"0.780"0.740"7 degrees8 degrees29.5"
67"6.940"
2.515"0.785"0.745"7 degrees8 degrees30"
68"6.950"
2.520"0.790"0.750"7 degrees8 degrees30.5"
69"6.960"
2.525"0.795"0.755"7 degrees8 degrees31"




Recommended settings for Z7 & Z7 Diamond Slalom

Needle Flat Wing at
Wing at
Size Length Depth From Tail From Tail 34 mph
36 mph
Binding
62" 6.880" 2.480" 0.770 0.720 7 degrees8 degrees27.5"
64" 6.890" 2.490" 0.780 0.730" 7 degrees8 degrees28.5"
65" 6.895" 2.495" 0.785 0.735" 7 degrees8 degrees29"
66" 6.900" 2.500" 0.790 0.740" 7 degrees8 degrees29.5"
67" 6.905" 2.505" 0.795 0.745" 7 degrees8 degrees30"
68" 6.910" 2.510" 0.800 0.750" 7 degrees8 degrees30.5"

Recommended settings for Nomad RCX Slalom

Needle Flat Wing at
Wing at
Size Length Depth From Tail From Tail 34 mph
36 mph
Binding
62" 6.88" 2.480" 0.770" 0.720" 7 degrees8 degrees27.5"
64" 6.90" 2.490" 0.780" 0.730" 7 degrees8 degrees28.5"
65" 6.91" 2.495" 0.785" 0.735" 7 degrees8 degrees29"
66" 6.92" 2.500" 0.790" 0.740" 7 degrees8 degrees29.5"
67" 6.93" 2.505" 0.795" 0.745" 7 degrees8 degrees30"
68" 6.94" 2.510" 0.800" 0.750" 7 degrees8 degrees30.5"




Recommended settings for Nomad RC Slalom

Needle Flat Wing at
Wing at
Size Length Depth From Tail From Tail 34 mph
36 mph
Binding
63" 6.89" 2.502" 0.760" 0.710" 7 degrees8 degrees28"
65" 6.91" 2.512" 0.770" 0.720" 7 degrees8 degrees29"
66" 6.92" 2.515" 0.775" 0.725" 7 degrees8 degrees29.5"
67" 6.93" 2.517" 0.780" 0.730" 7 degrees8 degrees30"
68" 6.94" 2.520" 0.785" 0.735" 7 degrees8 degrees30.5"

Recommended settings for X5 Pro, Pro Rose & CX Slaloms


Needle Flat Wing at
Wing at
Size Length Depth From Tail From Tail 34 mph
36 mph
Binding
63.5" 6.90" 2.505" 0.770" 0.720" 7 degrees8 degrees
28"
65.5" 6.92" 2.515" 0.780" 0.730" 7 degrees8 degrees29"
66.5" 6.93" 2.517" 0.785" 0.735" 7 degrees8 degrees29.5"
67.5" 6.94" 2.520" 0.790" 0.740" 7 degrees8 degrees30"
68.5" 6.95" 2.525" 0.795" 0.745" 7 degrees8 degrees30.5"
69.5" 6.96" 2.527" 0.800" 0.750" 7 degrees8 degrees31"

Speed and line length can affect settings

 Ski Binding Placement
Measurements are from the back of the heel rubber on front boot to tail of ski

 How we measure the fin
Factory fin set-up will be within .010 of recommended settings.
Final adjustments may be made to accomodate personal style and preference. 
Fins are set to factory spec's but the three point allen screws have not been adjusted
to the final locked position.To lock your final settings in place slowly tighten
(with the fin blade tight in the box) the two allen screws on top of the box
and the rear allen adjustment screw so they are all snug against the fin blade.
After doing so re-check measurements to be certain they have not changed.
Please visit our web-site  www.d3skis.com  for photos of each measurement 
Ski Preparation 
We use a mold release in our production process.
Your ski will feel smoother and more consistent if you clean the ski bottom with a mild cleaner and sponge.









D3 Custom Skis
807 Prospect St #4
Ellensburg, WA 98926

Phone: 916-714-9389
E-mail: [email protected]
www.d3skis.com


How we measure binding position


Wing in stock or middle position


Wing in bottom position


Wing in rear position