Recommended settings for 2008 Nomad RCX Slalom (Speed and line length can affect settings)
Size
Length
Depth
Needle From Tail
Flat From Tail
Wing at 34 mph
Wing at 36 mph
Binding
62"
6.88"
2.49
0.77
0.72
7°
8°
27.5"
64"
6.9"
2.495
0.78
0.73
7°
8°
28.5"
65"
6.91"
2.5
0.785
0.735
7°
8°
29"
66"
6.92"
2.505
0.79
0.74
7°
8°
29.5"
67"
6.93"
2.51
0.795
0.745
7°
8°
30"
68"
6.94"
2.515
0.8
0.75
7°
8°
30.5"
Recommended settings for 2007 Nomad RC Slalom (Speed and line length can affect settings)
Size
Length
Depth
Needle From Tail
Flat From Tail
Wing at 34 mph
Wing at 36 mph
Binding
63"
6.89"
2.502"
0.76
0.710"
7°
8°
28"
65"
6.91"
2.512"
0.77
0.720"
7°
8°
29"
66"
6.92"
2.515"
0.775
0.725"
7°
8°
29.5"
67"
6.93"
2.517"
0.78
0.730"
7°
8°
30"
68"
6.94"
2.520"
0.785
0.735"
7°
8°
30.5"
Recommended settings for 2005-2008 X5 Pro & CX Slaloms (Speed and line length can affect settings)
Size
Length
Depth
Needle From Tail
Flat From Tail
Wing at 34 mph
Wing at 36 mph
Binding
63.5"
6.90"
2.505"
0.760"
0.710"
6°
7°
28"
65.5"
6.92"
2.515"
0.770"
0.720"
6°
7°
29"
66.5"
6.93"
2.517"
0.775"
0.725"
6°
7°
29.5"
67.5"
6.94"
2.520"
0.780"
0.730"
6°
7°
30"
68.5"
6.95"
2.525"
0.785"
0.735"
6°
7°
30.5"
69.5"
6.96"
2.527"
0.790"
0.740"
6°
7°
31"
Recommended Fin Settings 2006 Nomad
Factory Settings:
2.495"
6.88"
.770"
The following settings should be used to fine-tune your fin for each specific size. Changes are minute but will make a difference as to how well your ski will perform.
Size
Depth
Length
Distance from Tail
Binding Placement
63"
2.48"
6.855"
.755"
28"
65"
2.49"
6.87"
.765"
29"
66"
2.495"
6.88"
.770"
29.5"
67"
2.50"
6.89"
.775"
30"
68"
2.505"
6.90"
.780"
30.5"
We recommend starting with a wing angle of 7 degrees. Some current D3 skiers are using the Nomad with the X5 recommended fin settings.This may be a consideration if the above settings do not work as expected. Extreme shortline skiers may want to add to a bit of depth to the fin.
Ski Binding Placement:
Measurements are from the back of the heel rubber on front boot to tail of ski
How we measure the fin:
Ski Preparation:
We use a mold release in our production process.
Your ski will feel smoother and more consistent if you clean the ski